Protocol STEALTH ONE, Instruction Manual

Page: 13 / 22

START-UP PROCEDURE
9
Before flying, the remote control and plane must be turned on in sequence.
1. Turn on the remote control – MAKE SURE THE THROTTLE IS AT ITS
LOWEST POSITION.*
2. Plug the battery into the plane to turn it on, place the cover over the
compartment, and place the plane on flat ground (Fig. 1)
3. Calibrate the plane by moving the sticks to the outer lower corners at the
same time and hold until the remote beeps (Fig. 2).
4. Unlock the throttle by moving it up until you hear a beep and then down
until you hear another beep. The throttle is now unlocked.
*VERY IMPORTANT – Even though the throttle is locked, for additional safety
make sure the throttle is at its lowest position when connecting the battery to
the plane. Make sure to keep body parts away from the propeller when con-
necting the battery.
CHECK:
Before each flight, double check the plane’s response to the controller. Very
gently, push up on the throttle to check the propeller without taking off. Move
the direction stick around to make sure the plane responds accordingly.
GYRO SPEED:
The Stealth One features multiple gyro speed modes. Choose the gyro level
based on flight experience and level of comfort. The gyro auto-stabilizes
the Stealth One and is good for beginners. For safety take time to develop
advanced skills by practicing at full gyro. Switch the Gyro button to change
gyro speed level.
Pull switch all the way forward towards you: Max Gyro – Best for beginners!
Push switch to center: Light Gyro
Push switch all the way back away from you: No Gyro – Advanced users only!
FIG. 1 FIG. 2