Protocol STEALTH ONE, Instruction Manual

Page: 10 / 22

7
9
10
8
PLANE SET UP
6
7. Connect the cord on each main
wing to the cord on the fuselage
making sure the colors of the wires
match up. Push the main wings into
the fuselage until they click into place.
9. Slide the landing gear into the
bottom of the fuselage until you
hear a click.
8. Install the hinge controls onto the
main wings and secure with 4 screws.
Next, install the push rods following
the instructions in steps 4-5.
10. Attach the propeller by following the above image.
Adapter Nut
Washer (0.5mm
thickness)
Nut
Propeller Washer
(2.5mm thickness)
Motor Shaft
Adapter
*Optional Clevis Keepers: For additional security, clevis
keepers are provided to keep the clevis from opening while in
flight. Before attaching the clevis to the hinge control, slide
the keeper over the clevis and onto the push rod. Attached
the clevis to the hinge control and slide the keeper onto the
clevis to keep it secure.
6. Slide the wing connector rod into
the hole on one of the main wings.
Slide the bar through the fuselage
and into the hole on the other
main wing.
6