background image

damp cloth to wipe away dirt. It's forbidden to immerse energy absorbers into the water. Plastic parts can be cleaned only with water. 
When the equipment becomes wet, either from being in use or when due cleaning, it shall be allowed to dry naturally, and shall be 
kept away from direct heat. In metallic products some mechanic parts (spring, pin, hinge, etc.) can be regularly slightly lubricated to 
ensure better operation. 
• personal protective equipment should be stored loosely packed, in a well-ventilated place, protected from direct light, ultraviolet
degradation, damp environment, sharp edges, extreme temperatures and corrosive or aggressive substances.

10. Warranty

The manufacturer grants a warranty for 12 months from the date of purchase of the device. If a defect is found in any part, the
warranty and guarantee period for this part is extended by the time of repairs and effective removal of the defect found.
The warranty covers:
• Defects in material,
• Structural defects,
• Anti-corrosion coating defects

In order to keep the warranty, it is necessary to follow procedures of periodic inspections specified in item 4 of the Instruction manual.

11. Identity Card

IDENTITY CARD FOR ANCHOR POINT AT150 (conforming with EN365 ) 

Inspection and Repair 

AT150

Reference number 
of device 

Location of installation 

User name: 

Date of first use 
(installation) 

Serial number: 

..............................................................................

................................................................................................................................................................................

................................................................................................................................................................................

........................

........................

........................

Date of manufacture: 

Date of 

inspection 

Type of inspection / repair 

Remarks 

Date of next 

inspection 

Name and signature 

of technician 

 No.

Date of purchase: 

1

2

3

4

5

6

7

8

9

10

P

ROTECTON OY -FINLAND- WWW.PROTECTON.FI

 

5/5

 READ AND UNDERSTAND INSTRUCTION MANUAL 

BEFORE USING THE EQUIPMENT 

 

Summary of Contents for AT150






Reviews: