AS-5020 | ENGLISH
12
5 Power LED
6 LED device status on
7 LED device status off
S Tamper-proof plug guard
U Washers
USE OF ADDITIONAL TRANSMITTERS
(MAX. 8 DEVICES)
The device functionality can be extended by adding more
transmitters (window contacts) with the result that the
extractor hood is not limited to a single window only. Each
individual transmitter can activate the exhaust air device.
FUNCTION SELECTOR SWITCH
You can select two functions (effective directions) with
the sliding switch (1) of the receiver. In the (OPEN) switch
position, the connected device is activated when a window
is opened (e.g. for exhaust air control use). In the (CLOSE)
switch position, the connected device (e.g. air-conditioner,
heater) switches off when a window is opened.
NOTE
: As long as the receiver is plugged into the wall
socket, a switching is not possible. To reverse the effective
direction, the receiver must be removed from the socket, the
switch be slid and the receiver be replaced into the socket.
RECEIVER INSTALLATION
Plug the AS 5020.3 receiver into a socket. Plug the device
to be switched into the receiver socket and screw on the
additional fuse (S). The power LED on the receiver is now on
and the receiver is ready for use.
Assembly and operating instructions for an
exhaust air controller Model AS-5020.3
(radio
version)
Thank you for purchasing the PROTECTOR
AS-5020.3 Exhaust Air Controller.
GENERAL
This device can be used as an exhaust air control device,
as an aid to monitor fresh air supply when commissioning
an exhaust air device (fume extractor hood, fan etc…).This
cannot replace self-monitoring to ensure fresh air supply, but
it can be supportive. This device only activates the exhaust
air system in the event of pressure equalisation when a
window or door is opened. The additional fresh air streaming
in can thus be drawn in from the outside.
You can also use this device to selectively switch devices or
lamps ON or OFF, for instance when a door or a window is
closed or opened. This, for example, enables significant red-
uction of energy costs for heating or air-conditioning devices.
ATTENTION
: When using this device for exhaust air control,
the shutter must be open to ensure adequate inflow of
fresh air!
KEY
1 Sliding switch
2 Transmitter (window)
3 Magnet for window transmitter
4 Test/Code button
AS-5020-3_I-Manual_150x180_Fin7.indd 12
08.09.15 11:48
