WARNING
Important safety instructions for people, READ CAREFULLY when you see this symbol:
Always cut off the power supply before performing any type of intervention.
Always make sure the gearmotor is properly connected to the earth
Use and installa�on of the product must comply with Machinery Direc�ve 2006/42/CE.
Installa�on must be carried out by expert qualified personnel who knows the poten�al hazards associated and in full compliance with current regula�ons.
Use of the product must be restricted to its intended use. Any other use is to be considered dangerous and therefore forbidden.
Do not allow children to play with the fixed command devices, or in the gate’s area of operation.
Keep the gate and the gate opener regularly maintained. Use only Proteco’s original spares. Users are strictly forbidden to carry out any changes
on the gate operator. Proteco Cancelli Automa�ci Srl is not liable for any damage resul�ng from improper, wrongful or unreasonable use.
1
1. SAFETY INSTRUCTIONS
Important safety instruc�ons for people, this product must only be used for its intended purpose.
Any other use is dangerous. Follow all instruc�ons as improper installa�on may result in in serious bodily injury.
Keep these warnings together with the installa�on and opera�on manuals that come with the gearmotor.
Keep any remote control devices (i.e. transmitters) away from children, to prevent the gearmotor from being
accidentally activated
CE
COMPLIANCE DECLARATION
Manufacturer:
PROTECO S.r.l.
Address
:
Via Neive, 77 – 12050 Castagnito (CN) – ITALIA
declares that
The product type:
PTP45 tubular motor for rolling shutters and awnings
Modelli:
PTP45 20, PTP45 30, PTP45 50, PTP45 50M
It complies with the essential requirements of EEC Directives:
2006/95/EC
Low Voltage Directive
2004/108/EC
Electromagnetic Compatibility Directive
The product also complies, with the constraints of the applicable parts, with the following standards:
EN 55014-1
EN 55014-2
EN 60335-1: 2002+A1+A11+A12+A2+A13
EN 60335-2-97:2006+A11
EN 61000-3-2
EN 61000-3-3
The manufacturer declares that the start-up of the machinery is not permitted unless the machine has been
identified and declared as conformed to
2006/42/EC Machinery Directive
.
Castagnito, October 1
st
2015
Marco
Gallo
Amministratore Delegato
