CLOSE
A�en�on! During manual opera�on we recommend to keep the limit switch screws
in downward posi�on.
.
3.3 WIRING
.
Wire the system according to the below diagram:
To be up to safety standards we recommend to fit a power cut device, keeping a
minimum distance of 3 mm between the contacts. Every motor has to have its own device.
WIRES KEY:
1
BLACK
2
BROWN
3
B
LUE
(Common
)
4
YELLOW/GREEN
If you wish to install the motor at your right, just switch the black wire with the brown.
It’s always wise to double check the wiring: if the rota�on should not proper, just switch the posi�on between
the black and the brown wires.
3.4 LIMIT SWITCH SETTING
3.4.1 LIMIT SWITCH IN CLOSING
Before fi�ng the store/awning to the octagonal adapter, let the motor run down �ll reaching the expected
end stop posi�on. Then fit the store.
5
6
Wiring diagram for motor installed at your left
OPEN/CLOSE
OPEN
