manualshive.com logo in svg

protech PC-550, User Manual, Page: 73 / 106

Share
Download
protech PC-550 User Manual Download Page 73

 

Chapter  5  Award BIOS Setup 

 

 

 

  

 

PC-550 USER

′

S MANUAL

 

Page: 5-15

 

 

 

5-8 LOAD BIOS DEFAULTS 

 

AUTO CONFIGURATION WITH BIOS DEFAULTS   

 
"LOAD BIOS DEFAULTS" loads the default BIOS values. When the 
diagnostic aid of your system becomes unusable, choose this option and the 
following message appears : 

 

Load BIOS Default ( Y / N ) ? Y 

 

To use the BIOS defaults, change the prompt to "Y" and press < Enter >, the 
CMOS is load automatically when you power on the PC-550. 

 

  

 
 

  

 

5-9 LOAD SETUP DEFAULTS 

 

  

 

AUTO CONFIGURATION WITH SETUP DEFAULTS 

 
This Main Menu item uses the default SETUP values. Use this option as a 
diagnostic aid of your system behaves erratically. Choose this item and the 
following message appears: 
 

Load SETUP Default ( Y / N )? Y   

 
To use the SETUP defaults, change the prompt to "Y" and press <Enter> The 
CMOS is load automatically form SETUP default values: 

Summary of Contents for PC-550











































































































Reviews:

No comments