Protec optimax 2010, Operation Manual, Page: 16 / 52

20 OPTIMAX
®
2010
Operation
Manual Mode
In the manual mode, the processor works without the film detection switches. The
film transport has to be started and stopped manually. All the set values in the man-
ual mode are also valid in the automatic mode. Please note that the Infeeding-film-
display (“– –”) is deactivated. Replenishment continues to operate based on detec-
tion of the film surface processed. Only if the film detection switches are activated,
will film measurement be performed. In the manual mode, a replenishment cycle
can also be activated manually.
Switching to manual mode:
Switch the machine on. During stand-by, press the arrow-buttons “up” (2) and
“down” (3) simultaneously. When in manual mode the display is flashing.
Switching back to automatic mode:
In manual mode with film transport off press both arrow-buttons “up” (2) and “down”
(3) simultaneously.
Manual starting and stopping the film transport:
1. Switch to manual mode.
2. Press the processing time button (4) - the button illuminates.
3. Start the film transport by pressing the arrow-button “up” (2) or stop the film
transport by pressing the arrow-button “down” (3).
Manual replenishment:
1. Switch to manual mode.
2. Press the replenishment time button (7) - the button illuminates.
3. Start the replenishment cycle by pressing the arrow-button “up” (2) or cancel
the replenishment cycle by pressing the arrow-button “down” (3).
Water Saving Mode
The water saving mode reduces the water consumption. If the water saving mode
is activated, exactly 50 % less water is consumed.
Activating the water saving mode:
1. Switch the unit off.
2. Press and hold the buttons processing time (4) and dryer output (6) simulta-
neously.
3. Switch the machine on again and release the pressed buttons.
4. Switch the water saving mode off or on with the arrow buttons (2 and 3). If you
enter
“0” , the water saving mode is off; if you set “1” , it is on.
5. Switch the unit of to save the settings.
Stop Film Transport
In a case of a film-jam inside the machine, the film transportation can be manually
interrupted. To stop the film transport press both arrow-buttons (2 and 3) simulta-
neously. Related topics:
see “Manual starting and stopping the film transport:” on page 20
see “Film is caught up in the racks” on page 29
OPTIMAX 2010 with 2 pumps see description starting on
page 53.