COMPACT 2 NDT
User Manual
5190-0-0002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
12 von 65
2.1
General safety notice
2.1.1
Requirements for operation
To ensure the safe operation of this processor, installation and use should always conform to the
instructions contained in this manual.
WARNING!
Non-diluted chemicals are caustic. For this reason, chemicals should be
handled very carefully. Avoid contact with skin, always wear protective
clothing, gloves and glasses when handling the chemicals.
WARNING!
Inhalation of chemicals can be dangerous to your health and should be
avoided. For this reason, always ensure that the room in which the processor
is installed is adequately ventilated.
WARNING!
Also when taking the racks out for cleaning or servicing. In case of chemicals
getting into the eyes, rinse eyes immediately with cold, running water for
approximately 15 minutes, and contact a doctor afterwards.
The developer and fixer chemicals used in the processor should be handled according to the
manufacturer instructions. In general: Non-diluted chemicals are caustic. For this reason, chemicals
should be handled very carefully. Avoid contact with skin, always wear protective clothing, gloves and
glasses when handling the chemicals - for example, when mixing and refilling. Also when taking the
racks out for cleaning or servicing. In case of chemicals getting into the eyes, rinse eyes immediately
with cold, running water for approximately 15 minutes, and contact a doctor afterwards. Inhalation of
chemicals can be dangerous to your health and should be avoided. For this reason, always ensure that
the room in which the processor is installed is adequately ventilated.
Environmental regulations regarding the storage and disposal of waste chemicals should be obtained
from the local water authorities and complied with.
Before opening the processor switch off the unit and unplug it from the electrical socket. Service and
repairs must be performed by trained service technicians only. Use only manufacturer replacement
parts.
WARNING!
Class I ME device (according EN 60601-1).
To reduce the risk of electric shock, this unit is designated exclusively for
connection to a supply network with protective earth.
2.1.2
Operating of the radiographic system
When having troubles with operating of the COMPACT 2 NDT, immediately call the Service of PROTEC
or an authorized service and stop the using of the COMPACT 2 NDT.
2.1.2.1
Operating type
The automated X-ray film processor is designated for continuous use.
