V6.0_2021-05-25
OPTIMAX 2010 Instructions for use
5160-0-0002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
6 of 35
General Notes
WARNING!
In order to maintain the set and tested requirements of the 60601 series of
standards, the ME system must not be modified during its actual operating
life.
Mechanical and Electric Warning
WARNING!
All moving parts of the equipment should be operated with care. They must
be inspected and maintained regularly and in accordance with the
manufacturer's recommendations contained in the accompanying
documents.
Only personnel authorized by PROTEC GmbH & Co. KG may carry out
maintenance and repair work. Touching live parts and connections can be
fatal.
To the User
NOTE
The user of these accompanying documents is required to carefully read and
consider the instructions, warnings and cautions contained therein before
beginning operation.
Even if you have already operated similar equipment, the equipment described here
may nevertheless have undergone changes in design, manufacture and functional
sequence which have a considerable influence on operation.
Assembly and customer service work on the system described here must be carried
out by the authorized and qualified personnel of PROTEC GmbH & Co. KG. Assembly
personnel and other persons who are not employees of the Technical Service
Department of PROTEC GmbH & Co. KG are requested to contact the local branch
office of PROTEC GmbH & Co. KG before starting any assembly or service work.
For assembly and service work, it is necessary to use the "Technical Description” of
the Product and to observe the points contained therein.
Even if the product has been the subject of a hazard analysis and the design
corresponds to the current state of the art, residual risks remain during clinical use.
These are illustrated in the following instructions for use by application limits,
warnings and precautions.
Assembly and customer service work on the X-ray film processor described here
must be carried out by the authorized and qualified personnel of PROTEC GmbH &
Co. KG. Assembly personnel and other persons who are not employees of the
Technical Service Department of PROTEC GmbH & Co. KG are requested to contact
the local branch office of PROTEC GmbH & Co. KG before starting any assembly or
service work.