V6.0_2021-05-25
OPTIMAX 2010 Instructions for use
5160-0-0002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
21 of 35
Relation of replenishment time and replenisher volume 1 pump version
Replenisher volume (ml/m2)
Replenishment time(s)
Replenishment rate
(ml per cycle)
150
10
37,5
300
20
75
450
30
112,5
600
40
150
750
50
187,5
900
60
225
1050
70
262,5
1200
80
300
1350
90
337,5
1485
99
371,3
Relation of replenishment time and replenisher volume 2 pump version
Replenisher volume (ml/m2)
Replenishment time(s)
Replenishment rate
(ml per cycle)
150
10
40
300
20
80
450
30
120
600
40
160
750
50
200
900
60
240
1050
70
280
1200
80
320
1350
90
360
1485
99
396
NOTE
Values for pump setting 100% supply volume or fort o 85% for 60Hz supply.
4.1.14
Machine cover safety disconnection
The machine cover may only be removed for service and maintenance purposes. The processor cannot
be started without the cover. In the event that the machine cover is removed during film-throughput,
the film transport will be stopped. On the display the error message
“E1”
will be displayed. This will
render the film unsuitable. The error will be reset when the machine cover is reinstalled. Thereafter the
motor may run a little faster for a short time
4.1.15
Auto fill function
In case new chemicals have to be filled into the processor (after installation, tank cleaning), the tanks
can be filled automatically by means of the auto fill function. In the process, the tank is filled for a fixed
period of 20 minutes, that is, chemicals are pumped from the replenishment containers to the tanks.
Also the water bath will be filled (3 min. period). The display will show two symbolized tanks. When the
auto fill function has been completed, the machine enters the stand-by mode. If the respective baths
are full before the time is up, the auto fill function can be stopped manually. The level switch in the
developer bath detect a full bath and switches the pump off. The automatic tank filling can also be
terminated manually.