50
MARK76X5002 Rev 3
Note - When one of the above mentioned errors appears on the display, you should no longer
use the tanning unit and you should disconnected it from the mains outlet or plug. Contact
ProSun immediately.
Note:
When one of the above-mentioned fault messages appears on the display, you should no longer use the sunbed
and the plug should be removed from the main outlet. Contact your dealer.
If one of the other faults occurs, the machine will still function, but not all the functions will be fully available.
During fault E18 and E19 the machine cooling will run at maximum throughout the entire session. To correct this,
contact your dealer.
E20: Air conditioning reservoir full
Check whether the reservoir for the air conditioning is full. If the reservoir is full, you should empty the reservoir
(see section ‘Emptying air conditioning reservoir’ in this manual). The fault message disappears after several
seconds. If the fault message does not disappear, contact your dealer.
E21: Cleaning the air conditioning
The air conditioning must be thoroughly cleaned every 6 months. If the air conditioning has not been cleaned
within the past 6 months, fault message ‘E21: Clean the air conditioning’ will appear. You must thoroughly clean
the air conditioning. After it has been cleaned, you must reset the ‘Airco service date’. For more information,
consult the ‘Cleaning’ section in this manual.
Malfunction
When a malfunction occurs, the buttons , ,
and O flashes when the machine is in standby. The machine
also produces 3 rapid beeps once every minute. Press all four of the buttons at the same time to see which fault
or faults have occurred.
Error
E3 = Communication fault between the
I/O controller and switch board.
Critical errors:
E1 = Internal timer has a defect
E2 = Fan in bottom tray has a defect
E3 = Communication error between relay
and switch part
E6 = Unknown phase
E7 = Relay failure
E9 = Maximum temperature bench
E10 = Maximum temperature canopy
E11 = Communication error with fan board
Errors:
E18 = Communication error with bench temperature
sensor
E19 = Communication error with canopy temperature
sensor
E20 = Air conditioning reservoir full
E21 = Clean air conditioning
Error Messages
If a critical fault occurs, the malfunction screen appears
automatically. The text ‘Malfunction’ appears at the top
of the screen, and the fault code and an explanation
appear at the bottom. Use the and buttons to view
the various fault messages. For faults E18, E19, E20
and E21 you can exit the malfunction screen with the
or button.
Summary of Contents for Luxura X5 38 SLi High Intensive
