27
MARK76X5002 Rev 3
Electrical Connections
DANGER!
WARNING!
Risk of electrical Shock
To avoid the risk of electrical shock, this equipment must only be connected to a
supply mains with protective earth.
Live Components
Risk of fatal injury due to electrical shock when touching live parts.
Both the power supply and the related connection work must comply with national standards.
The connection work and replacement of the power supply cord must be done by a certified
electrician or technician. The connection to the 3 pole 230V mains must be protected by
maximum over current protection. For Canada a Class-A ground fault circuit (GFCI) has to
be used. Any equipment outside of the US and Canada needs to comply to their countries
standards.
Connection Requirements
There must be an emergency disconnect to turn off the unit in the room.
The tanning device is by default set up in single phase wiring, but can be wired for 3-phase
wiring upon placing the order. It can be changed in the field as well by a certified electrician or
technician.
White
Black
Red
Green
Connecting an external timer
In the back of the unit your external
timer can be connected if your unit is
not T-max integrated. Here you will see
a terminal block with four colored wires.
The Green and Red wires go to the J3
contact on the back of your timer, and
the white and black wire go to the Ext
Start on the back of your tmax. You
do not need to connect the Ext Start
(external start),this is only if you want
to use the external start function and
bypass the delay time directly through
the display.
Summary of Contents for Luxura X5 38 SLi High Intensive
