Configuring Modbus/BSAP
RLXIC-SV
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
ProSoft Technology, Inc.
Page 87 of 146
May 29, 2009
9.3.4 Configure other RTU settings.
Other parameters may need to be changed, but this is dependent on the RTU
type being used. As a minimum, this typically involves setting the proper serial
settings to match your RTU.
9.3.5 Optional:
Dynamic
IP
Address
If you do not have a static IP, the host modem should be configured to report its
current IP to a Dynamic DNS (DDNS) server with IP Manager.
You will need to match the name of the modem to the names specified in the
host modem's MLIST or MLISTX for the connected RTU.
When you configure IP Manager for the host modem, make note of your modem
name and domain setting in AceManager in the menu selection
D
YNAMIC
IP
to be
used with the remote modems.
When you use names instead of IP addresses, to ensure your modems are
updated quickly with the correct IP addresses for the names, you will want to set
the DNS settings as well. In AceManager, select
DNS
.
Configure *DNSUSER to the same IP address as the IP Manager
(*IPMANAGER1). If your modems have dynamic IP addresses, and not static
(the IP address can change when it is powered up), configure *DNSUPDATE to a
low interval to allow frequent updates.
