Configuration Commands
RLXIC-SV
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
ProSoft Technology, Inc.
Page 115 of 146
May 29, 2009
*USD=n
Waits the specified delay before sending the first UDP packet and the
subsequent UDP packets out to the port Ethernet.
n=0
: No UDP packet delay (Default).
n=1 - 255
: Delay in 100 ms units, from 100 ms to 25.5 sec.
11.3.5 DNS
This group includes commands specific to the modem being able to use domain
names instead of IP addresses for other configuration options.
*DNSn=d.d.d.d
Queries the DNS addresses. Your cellular carrier provides the DNS addresses
while your modem is registering on their network.
n=1
or
2
: First and second DNS address.
d.d.d.d=IP address
of domain server.
*DNSUPDATE=n
Indicates whether the modem should send DNS updates to the DNS server
specified by *DNSUSER. These updates are as per RFC2136. They are not
secure and are recommended only for a private network. In a public network, the
IP Logger services should be used instead.
n=0
: DNS updates disabled (Default).
n=1
: DNS updates enabled.
*DNSUSER=d.d.d.d
Sets a user-provided DNS to query first when performing name resolutions in the
modem.
d.d.d.d=IP address
of domain server
Note:
You can set up a second DNS User, if you have two DNS users.
