Configuration Commands
RLXIC-SV
♦
Intelligent Cellular
User Manual
RadioLinx Intelligent Cellular Serial Modem for the Verizon Wireless CDMA Network
ProSoft Technology, Inc.
Page 117 of 146
May 29, 2009
*IPMGRKEYn=key
Sets the 128-bit key to use to authenticate the IP update notifications. If the key's
value is all zeros, a default key will be used. If all the bytes in the key are set to
FF, then no key will be used (that is, the IP change notifications will not be
authenticated). AT*IPMGRKEY1 is used to set the key to use with
AT*IPMANAGER1, while AT*IPMGRKEY2 is used to the key with
AT*IPMANAGER2.
n=1
: First IP Manager server.
n=2
: Second IP Manager server.
key=128-bit key
in hexadecimal [32 hex characters]
*IPMGRUPDATEn=m
Sets the number of minutes to periodically send an IP update notification to the
corresponding server. This will occur even if the IP address of the RLXIC-SV
does not change. *IPMGRUPDATE1 is used to set the refresh rate to
*IPMANAGER1, while *IPMGRUPDATE2 is used with *IPMANAGER2. If the
value is set to 0, then periodic updates will not be issued (that is, IP change
notifications will only be sent when the IP actually changes).
n=1
: First IP Manager server.
n=2
: Second IP Manager server.
m=0, 5-255
: Number of minutes to send an update.
*MODEMNAME=name
Name of the RLXIC-SV (up to 20 characters long) to use when performing IP
address change notifications to IP Manager. The value in *DOMAIN provides the
domain zone to add to this name.
name=modem name
(for example, mymodem)
Example: if *MODEMNAME=mymodem and *DOMAIN=eairlink.com, then the
modem's fully qualified domain name is mymodem.eairlink.com.
Automatically Generated Names:
#I3 - The ESN/IMEI will be used as the name.
#CCID - The CCID will be used as the name.
#NETPHONE - The phone number will be used as the name.
Tip:
Each modem using IP Manager needs a unique name. Two modems cannot be called
"mymodem". One could be "mymodem1" with the other as "mymodem".
