PDPM ♦ ProLinx Gateway
Diagnostics and Troubleshooting
PROFIBUS DP Master
Protocol Manual
ProSoft Technology, Inc.
Page 53 of 70
June 24, 2013
Error
Number
Description
0
No error
4
Task does not exist
5
Task is not initialized
6
The MCL is locked
7
The MCL rejects a send command because of an error
20
Database not configured
21
Data base segment not configured or not existent
22
Number for message wrong during download
23
Received number of data during download does not match to that in the command
message
24
Sequence identifier wrong during download
25
Checksum after download and checksum in command message does not match
26
Write/Read access of data base segment
27
Download/Upload or erase of configured data base type is not allowed
28
The state of the data base segment indicated an error. Upload not possible
29
The access to the database segment needs the bootstrap loader. The bootstrap
loader is not present
30
Trace buffer overflow
31
Entry into trace buffer too long
37
No or wrong license. The OEM license of the system configuration allows only
communication to devices that have the same license inside
38
The database created by the system configuration and the database expected by the
firmware is not compatible
39
DBM module missing
40
No command free
41
Command unknown
42
Command mode unknown
43
Wrong parameter in the command
44
Message length does not match to the parameters of the command
45
Only a MCL does use this command to the RCS
50
FLASH occupied at the moment
51
Error deleting the FLASH
52
Error writing the FLASH
53
FLASH not configured
54
FLASH timeout error
55
Access protection error while deleting the FLASH
56
FLASH size does not match or not enough FLASH memory
60
Wrong structure type
61
Wrong length of structure
62
Structure does not exist
