Configuration
PDPM ♦ ProLinx Gateway
Protocol Manual
PROFIBUS DP Master
Page 28 of 70
ProSoft Technology, Inc.
June 24, 2013
The following table shows all configured slave devices from the main editor
window. Use this dialog box to assign slaves to selected groups.
The chosen group selection is transferred to the slaves within their startup
sequence. The group selection serves as a filter for a special DP command
called ´global control´, which can be sent as a broadcast message to selective
groups.
This command is normally used by an application program to send the output
data Sync and the input data Freeze command.
3.1.8 Project Information
Common information regarding the project can be written to the configuration
documentation by choosing
Settings,
then
Project Information
from the menu.
This information can be printed or displayed in the window.
