MVI56E-MNETC ♦ ControlLogix Platform
Procedures
Modbus TCP/IP Multi Client Enhanced Communication Module
Setup Guide
ProSoft Technology, Inc.
Page 57 of 72
April 18, 2011
Checking Read Data
The following steps show you how to verify that the ReadData Command is
working.
1
In Concept, navigate to the
R
EFERENCE
D
ATA
E
DITOR
, and enter the following
values in processor memory addresses from 400801 through 400810 as
shown in the following illustration.
This action populates the memory addresses in the Quantum processor that
the MVI56E-MNETC will attempt to retrieve with the ReadData Command.
2
In RSLogix 5000, the values in
MNETC.DATA.R
EAD
D
ATA
[0]
through
[9]
should match the data you entered in Concept.
Tip:
Repeat these tests, using different values each time, to verify that the same data appears in
the proper place in each processor.
