ILX69-PBM ♦ CompactLogix™ or MicroLogix™ Platform
Introduction
PROFIBUS Master Communication Module
User Manual
ProSoft Technology, Inc.
Page 9 of 113
1.5.2 System Requirements
ProSoft fdt Configuration Manager software
PC with 1 GHz processor or higher
Windows
®
7 (32 bit) SP1, Windows
®
7 (64 bit) SP1, Windows
®
XP (32 bit) SP3
Administrator privilege required for installation
Internet Explorer 5.5 or higher
The software Microsoft .NET Framework 3.5 or 4.0 (Included in the ProSoft fdt
Configuration Manager installation package)
Free disk space: minimum 400 MB
RAM: minimum 512 MB, recommended 1024 MB
Graphic resolution: minimum 1024 x 768 pixel
Keyboard and Mouse
Note:
If the solution file is saved and opened again, or if the solution file is
used on another PC, the system requirements must match. Particularly,
the DTM must be installed on the used PC.
Restrictions
Touch screen is not supported.
When ProSoft fdt Configuration Manager is installed on a PC, Hilscher standard
SYCON.net and legacy PROSOFT.fdt cannot be and shall not be installed, and vice-
versa.
1.5.3 Hardware Requirements
The following minimum hardware is required to use the ILX69-PBM:
Windows PC for the ProSoft fdt Configuration Manager software (advantageous with
SD card slot or SD card reader). Refer to section System Requirements (page 9).
Ethernet cable for ProSoft fdt Configuration Manager or ILX69-PBM Webpage
connection.
CompactLogix System
Personal Computer
1769
– Programmable controller (1769-L23, 1769-L32E and 1769-L36ERM)
1769
– Power supply
1769
– Right or left termination end cap
Ethernet cable for interface to the 1769 programmable controller.
