Pro'sKit MT-1236, User Manual

Page: 7 / 40


Reading Hold mode
The reading hold mode can keep the current reading on the display and the
symbol
“ ”.change the measurement function position or press
“ HOLD ”button again to exit the data hold mode.

Backlight and lighting function
Short press button to turn on backlight; and short press again to exit.
It turns off automatically with no operation for 15S.
Long press button to turn on the lighting function and the backlight at
the same time. Short press the button again to turn off the lighting function. It
turns off automatically with no operation for 30S.

Function select
Press the
“FUNC/HZ” button and enter into function selection mode.
3.2 Measurement guidelines
3.2.1 Measurement of AC voltage and DC voltage
To avoid any electric shock and/or damage to the meter, do not
attempt a voltage measurement if the voltage (valid value) is
over 600V DC or AC current.
To avoid any electric shock and/or damage to the meter, don't
attempt to impose between any public terminal and ground any
voltage whose valid value is over 600V for DC or AC current.
The meter provides DC/AC voltage measuring ranges as follows: 600.0mV,
6.000V, 60.00V, and 600V.
Measurement of AC voltage or DC voltage

Turn the rotary switch to the position V and press
“FUNC-Hz” to choose
DCV or ACV

Connect the test lead in black and test lead in red to COM input socket and V
input socket respectively.

Use another two ends of the test lead to measure the voltage of the circuit to
be measured. (In parallel connection with the circuit to be measured)

Read the measured voltage value on LCD screen. When DC voltage
measurement is attempted, the display unit will show the voltage polarity of
the circuit connected to the pen-shaped meter in red.
Notes:

Within the measuring range of DC and AC voltage of 600mV, even if there is no
input or no connection to the test lead, the meter will display some information.
In this situation, press short circuit “V
－

” and “COM” terminal to reset the
meter to zero.