RO-
pro
Reverse Osmosis System
Manual
SYSTEM START UP:
Turn on the cold water supply at the stopcock and turn the cross piece on the saddle tap valve anti-clockwise
to open. Close the tank ball valve. Open the tap for continuous flow (Lever Up). Check the system for leaks,
tighten as necessary. After 10-30 minutes, water will start to drip out of the tap. Let it drip for about 10
minutes and then flip the tap handle to the closed position. TURN ON THE TANK BALL VALVE NOW.
It may now take several hours for the storage tank to fill, depending on the local water pressure.
Note:
DO NOT DRINK THE WATER FROM THE FIRST TANK PRODUCED BY YOUR NEWLY PURCHASED RO-PRO
SYSTEM.
After the tank is full (you will hear the water stop), flush the system by placing the tap in the open position
until all the water is completely discharged. Upon complete discharge of the storage tank, return the tap
handle to the closed position and let the refilling process begin. This process could take 2-3 hours to
complete. After the second tank is filled, you may enjoy the pure water. Check for leaks daily for the first
week and periodically thereafter. You may notice that the water may be milky coloured during the first
week. This is caused by air bubbles in the water released from the carbon filter, they will dissipate on
allowing to stand. It is normal and safe.
NOTE:
DO NOT USE WITH WATER THAT IS MICRO BIOLOGICALLY UNSAFE OR OF UNKNOWN QUALITY WITHOUT
ADEQUATE DISINFECTION BEFORE OR AFTER THE SYSTEM. SYSTEMS CERTIFIED FOR CYST REDUCTION MAY
BE USED ON DISINFECTED WATER THAT MAY CONTAIN FILTERABLE CYSTS.
THIS REVERSE OSMOSIS SYSTEM CONTAINS A REPLACEABLE COMPONENT CRITICAL TO THE EFFICIENCY OF
THE SYSTEM. REPLACEMENT OF THE REVERSE OSMOSIS COMPONENT SHOULD BE WITH ONE OF IDENTICAL
SPECIFICATIONS, AS DEFINED BY THE MANUFACTURER, TO ASSURE THE SAME EFFICIENCY AND
CONTAMINANT REDUCTION PERFORMANCE.
WARNING:
DO NOT USE THIS RO-PRO SYSTEM TO PURIFY NON-DRINKABLE SOURCES OF WATER THAT
ARE UNSAFE OR WITH WATER OF UNKNOWN QUALITY/
WARNING:
NEVER USE HOT WATER OR ALLOW THE UNIT TO FREEZE.
WARNING:
INCORRECT INSTALLATION WILL VOID THE WARRANTY.