PROSEP FILTER SYSTEMS RO-pro-325 Operation & Installation Instruction Manual Download Page 3

RO-

pro

 

Reverse Osmosis System   

 

 

                  Manual

CHECK LIST:

1) 

TGI Reverse Osmosis System.

2) 

Water Storage tank, (2.8 gallon @ 40psi).

3) 

Four coloured tubing (black, blue, red, yellow) 1/4” OD (some supplied 3/8” OD), 4’ each colour.

4) 

Installation kit: tank ball valve, drain saddle tap valve, feed water valve, tap assembly.

5) 

Manual.

This Reverse Osmosis system contains a replaceable treatment component critical for effective reduction of total 
dissolved solids. 

System Tested and Certified by NSF International against ANSI/NSF Standard 58 for the reduction of Barium, 
Cadmium, Copper, Cyst, Hexavalent Chromium, Lead, Radium 226/228, Selenium, TDS, Trivalent Chromium.

RECOMMENDED TOOLS LIST

 

 

Variable speed drill

 

 

1/8” and 1/4” drill bits

 

 

7/16” drill bit 1/2” and 9/16 open-end wrenches (or adjustable)

 

 

Phillips screwdriver

 

 

Utility knife

 

 

Teflon Tape

PRE  PLUMBED  REVERSE 

OSMOSIS SYSTEM

SADDLE  TAPPING  VALVE 

WITH TUBE ATTACHED

WATER  STORAGE  TANK  AND 

BALL VALVE

TAP  AND 

CONNECTOR

WASTE PIPE 

CONNECTOR

Summary of Contents for RO-pro-325









Reviews: