6
PRS-UM-DP8-EN-Rev.4.1-16.08.2021
Panel Dimensions
Panel dimensions are explained in Diagram 2:
Front
Side
Top
Side
Diagram 2: Dimensions (mm)
Installation
The S-DP8 control panel box should never be placed in an explosive atmosphere and should
be readily accessible. It is necessary to drill holes for cable glands either on the top or
bottom of the control unit, depending on which side the electric cables are running in.
Please unscrew and remove the electronic parts before drilling to avoid any accidentally
damaging. S-DP8 control panel should not be placed nearby high voltage cables or power
cable, coaxial cables or transmitters, welding stations or frequency regulators. The S-DP8
panel box produced based on IP66 standard specifications. Always use prepared screw holes
to mount it and do not pierce panel from any other side. Always use suitable cable glands to
make cable entries. There is a plastic cover to protect panel from outer shells, water and
dust. To reach to panel, you need to open plastic cover via pressing both sides of the latches
on the front. If panel ordered with keys the lock key is necessary to open plastic cover.
Press to open
Diagram 3: Front cover
