16
PRS-UM-DP8-EN-Rev.4.1-16.08.2021
Programming
The panel is already programmed and ready for using when shipped. User should adjust the
alarm settings via changing alarm levels for each channel depending on the detectors
installed. Each channel parameters should be adjusted regarding related detector
measurement unit and range. These adjustments can be done via using the keys nearby LCD.
Each detector can also be named in the menu. The menu steps are given in Diagram 11.
Diagram 13: Menu structure
S-DP8 control panel keeps data and time information to record alarm events in the internal
log space. The alarm logs menu is not available when panel uses RS485 module to
communicate to Prosense Panel Monitor software.
To activate configuration menu, press and hold the MENU button for a second. You can
navigate between the menu items via using the UP and DOWN keys. Press MENU key again
to enter submenu. You can EXIT from submenu or menu by pressing the EXIT button.
1.
Channel setting
2.
Time / Language settings
3.
Relay assignment
4.
Alarm logs
Setup Channel Parameters:
To adjust channel parameter follow below steps.
1- Press Menu button for 2 seconds. The screen will display menu options:
2- Select Channel setting via pressing the MENU button. Screen will list channels:
1- Channel setting
2- Relay assignment
3- Panel ID
4- Language
1. Detectr. 5. Detectr.
2. Detectr. 6. Detectr.
3. Detectr. 7. Detectr.
4. Detectr. 8. Detectr.
MENU
1-Detector Setting
Panel Address = 1
Aux > Alarm2
Alarm > Automatic
4-Language
2-Relay Assign
3-Panel ID
>Turkish
English
Main menu screen
Menu
1-
Channel Settings
2-
Relay Assign
3-
Panel ID
4-
Language
