20
PRS-UM-DP8-EN-Rev.4.1-16.08.2021
Press MENU button to change AUX relay assignment. A cursor will be activated on the screen
and you can change assignment via using UP and DOWN buttons. Press EXIT button to save
assignment and return the screen.
When AUX relay assigned to ALARM3, Digital Input port will be activated on the panel. In this
case it will be shown as 9th line on LCD as “Digital Alarm” in case an alarm status received
from external device:
Panel Address Assignment:
To enable RS485 communication panel ID should be set prior to start communication. Each
panel located on same serial connection bus should have different ID. Panel ID can be set via
using the LCD screen and menu buttons on panel itself. Please press Menu button on panel.
The menu items will be shown as below:
Please select item “3-Panel ID” via up and down buttons and press Menu button. The
current address will be displayed in new screen:
The default address is 1. Please change the address using up and down buttons. Press Exit
button when you set up address to the desired number.
Relay Assign
Aux
>
Alarm2
Alarm
>
Latching
10,17,5 9/2/19 FRD
7
>
DEDECTR 5 LEL
8
>
DEDECTR 0 LEL
9
>
Digital Alarm
Menu
1-
Channel Settings
2-
Relay Assign
3-
Panel ID
4-
Language
PANEL ID
Panel Adres=1
