ProScan PSVR71 User Manual Download | Manualshive

Page: 71 / 84

background image

69

Reference

Questions and Answers About
COMMERCIAL

ADVANCE

Will commercials be scanned through only on playback of recordings?

Yes. The VCR does not rewind and mark commercial segments until after recording is finished.

How fast does the COMMERCIAL

ADVANCE VCR scan through the commercial

breaks?

In SLP tape speed, a 3-minute commercial break is scanned through in approximately 8-12 seconds. In SP, it takes about
25-35 seconds.

Are commercials still recorded if I want to watch them?

Yes. The recorded program, including commercials, can be viewed by setting the Playback feature to MANUAL.

What if the VCR scans forward through part of my program?

Simply rewind the tape to just before the skipped segment, and press PLAY to view the program.

Once a recording has been marked, does COMMERCIAL

ADVANCE work each

time the tape is played?

Yes. If the Playback feature is set to AUTO, the marked commercials should be skipped each time the tape is played in a
COMMERCIAL

ADVANCE VCR.

After marking commercials, is the tape left at the beginning or end of the
recording?

The tape is left at the end of the recording so it is in position to begin additional programmed recordings.

Does the marking process interfere with other programmed recordings?

No. If two or more recordings are programmed together without sufficient time to mark the first recording, marking will
take place after all recordings are completed.

What happens if the marking process is interrupted?

Marking can be interrupted to allow use of the VCR. Marking will resume again when the VCR’s power is turned off as
long as the tape has not been ejected from the VCR.

Does COMMERCIAL

ADVANCE work in all recording speeds?

Yes, COMMERCIAL

ADVANCE works in SP and SLP.

Will COMMERCIAL

ADVANCE marked recordings work in non-Commercial

Advance VCRs?

A COMMERCIAL

ADVANCE marked recording will play in a non-commercial advance VCR, but commercials will not

automatically be skipped.

«
...
69
70
71
72
73
...
»

Summary of Contents for PSVR71





















































































Reviews:

No comments

Related manuals for PSVR71

Brand: Aiwa Pages: 86

Brand: Symphonic Pages: 31

Brand: RCA Pages: 2

Brand: SOUNDMASTER Pages: 35

Brand: Sharp Pages: 36

Brand: Sharp Pages: 41

Brand: Sharp Pages: 44

Brand: Sharp Pages: 12

Brand: Sharp Pages: 32

Brand: Sharp Pages: 40

Brand: Sharp Pages: 36

Brand: Sharp Pages: 34

Brand: Sharp Pages: 38

Brand: Sharp Pages: 82

Brand: Sharp Pages: 82

Brand: Sharp Pages: 78

Brand: Sharp Pages: 78

Brand: Sharp Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands