l
Press
M E N U
when
V o l u m e
is highlighted to enter the
VOLUME
adjustment display. Press + to increase or to
decrease the TV’s volume. This volume control raises
and lowers the volume of the internal, external, and
surround speakers.
Note:
If the
VOLUME
display stops before it is at full volume and
the volume is not high enough, check the
Volume limiter to see
if
it is set too low.
Details are on page 24.
l
Press
MENU
when
the Balance
function is highlighted to
enter the
BAL
A
NCE
adjustment display. Then press + or
to adjust the left/right balance until the sound
to
originate from a point halfway between the speakers.
l
Press
MENU
when
Rear spkr
(speaker):
on/off
function is
highlighted
to
select either
Rear spkr: on
or
Rear spkr: off.
Leave
this function
set to Rear spkr: on to
hear sound from
the rear (surround) speaker(s).
l
Press
MENU
when
Rear volume
is highlighted to enter the
REAR VOLUME
adjustment display. Press + to increase the
volume from the rear surround speaker(s) or to decrease
the volume from the rear surround speaker(s).
l
Press
MENU
when
the Input balance
function is highlighted
to enter the
INPUT BAL
A
NCE
display. The
INPUT BAL
A
NCE
display is used to balance the left and right audio signals
coming into the set for optimum surround sound
performance.
Most of the time you will want to leave this
at mid scale. If the sound coming from your surround
sound speaker(s) has a lot of voices (instead of mostly
background ambience), you may want to adjust the
I N P U T
BALANCE
display to minimize the voices. With the
INPUT
BAL
A
NCE
display on the TV screen, press the + and
buttons to move to the right and to the left of the scale.
Stop at the point where voices are minimal in the surround
i
speaker(s).
Note:
When adjusting the
INPUT BALANCE,
the front speakers
will automatically be muted. This allows you to hear only the
sound from the rear surround speakers. Adjust the sound to
minimize voices and to give mostly background ambience.
l
Press
MENU
when
Noise seqncer
(sequencer):
on/off
is
highlighted to select either
N o i s e s e q n c e r : o n
or off. The
noise sequencer supplies audio noise to each audio
channel (left, right, center, and surround) one at a time.
This allows you to check and adjust the volume level and
balance to each channel as well as check to see if all the
speakers are working correctly.
l
Press
MENU
when
Done
is highlighted to exit the
PHANTOM
SETUP
menu.
Saving, Restoring, and Returning to Factory
Settings
The TV will remember your settings-even when you
turn it off. To prevent losing your personal settings
because someone changes them accidentally, you can
save them using the
MEMORY MENU
.
After the settings
have been saved, you can restore them at a later date
using
MEMORY MENU.
MEMORY MENU
you
easily restore the
menu to its factory
settings.
Details are on page 39.
3 5
Summary of Contents for PS52682
Page 65: ...I I I I I I I I I I t 1 I I I I 1 II 1 I 1 ...
Page 81: ......
Page 85: ......
Page 86: ......
