2
3
1.1 Bottom Interface:
1.2 Slide Interface:
INTERFACE GUIDE
15. If an outside antenna or cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some protection against voltage surges
and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA
Number 70-1984 (Section 54 of Canadian Electrical Code, Part 1) Provides information
with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna-discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrode. See following example.
16. Mains plug is used as the disconnect device. It shall remain readily operable and should
not be obstructed during intended use.
1. Color Screen
2. Remote Sensor
Do not bIock this sensor or the
remote control will not work.
3. Power Indicator
Indicates whether the Unit is ON
or in OFF mode.
Light in red: The Unit is in STANDBY.
Light in green: The Unit is turned ON.
4. Speakers
1. Headphone Jacks
2. PC AUDIO IN Jack
3. TV ANTENNA Terminal
4. VGA lN Jack
5. AV (VlDEO/AUDIO L/R) in
6. HDMllN Jacks
7. USB port
8. COMPONENT lN Jack
9. Coax OUT Jack
10. Power Cord
OPERATING GUIDE
Control Reference Guide
