18
19
Sound Menu
Set the preferred sound track of analog channels. Stereo and SAP exist on some
channels. Generally SAP is a second language sound or help the people with
hearing impair.
Set the preferred sound track of digital channels. French exist on some channels.
Set the audio output type of coax or optical terminal. Raw means output the original
format of audio stream. PCM can be matched with most AV amplifiers.
Set the sound mode, and Bass /Treble/Balance, see page 20.
Sound Settings
Set to enjoy the virtual surround sound. Press ENTER to set or cancel.
Surround Mode
AVL
Auto Volume Level. Press ENTER to set or cancel. When AVL is set on, it will limit
the sound being heard when sudden changes in volume occur during commercial breaks
or channel changes. Usually be enabled at night.
Available at analog TV channels. SAP/Stereo/Mono
Analog Sound
Available at digital TV channels. English/French
Digital Sound
Digital Audio Output
PCM/Raw/Off
Equalizer Settings
Adjust the curve of 7 bands equalizer, see page 21.
Advanced Picture Settings
Press to highlight the item and press to change the setting as following.
Dynamic Contrast
Off/Low/Medium/High
The system will adjust the luminance curve by analyzing the picture content dynamically.
Film Mode
Off/On
For the 2:2 or 3:2 format signal of cinema , enable special pix
Moving area.
Noise Reduction
Off/Low/Medium/High
You can clear up analog TV signal by reducing the dot noise. This feature is not available
at PC or Media source.
MPEG Noise Reduction
Off/Low/Medium/High
Similar with the Noise Reduction, you can set to reduce the block noise.
