Proroute GEM420 Page 57 User Manual Download

Page: 57 / 166

Proroute GEM420 4G M2M Router

GEM420 User Manual



Tag-based VLAN Tagging for Location-free Departments

Tag-based VLAN function can group Ethernet ports, Port-1 ~ Port-4, and WiFi Virtual

Access Points, VAP-1 ~ VAP-8, together with different VLAN tags for deploying

department subnets in Intranet. All packet flows can carry with different VLAN tags

even at the same physical port for Intranet. These flows can be directed to different

destination because they have differentiated tags. The approach is very useful to

group some hosts in different geographic location to be a same department.

Tag-based VLAN is also called a VLAN Trunk. The VLAN Trunk collects all packet

flows with different VLAN IDs from Router device and delivers them in the Intranet.

VLAN membership in a tagged VLAN is determined by VLAN ID information within

Summary of Contents for GEM420







































































































































































Search results

Summary of Contents for GEM420

Reviews:

Related manuals for GEM420

Brands by name

Popular brands

Proroute GEM420, User Manual

Search results

Summary of Contents for GEM420

Reviews:

Related manuals for GEM420

Brands by name

Popular brands