manualshive.com logo in svg

Proroute GEM420, User Manual, Page: 41 / 166

Share
Download
Proroute GEM420 User Manual Download Page 41

Proroute GEM420 4G M2M Router

 

 

GEM420 User Manual 

 

  41 

3.1.1.2.2.2  Static IP Address 

Select this option if ISP provides a fixed IP address to you. You will need to enter 

in the IP address, subnet mask, and gateway address, provided to you by your 

ISP. Each IP address entered in the fields must be in the appropriate IP form, 

which is four IP octets separated by a dot (x.x.x.x). The gateway will not accept 

the IP address if the format is not correct. This does not relate to Fixed IP SIM’s. 

 

 

1. 

WAN Type:

 Choose “Static IP” from the drop list. 

2. 

WAN IP address/ Subnet  Mask/ Gateway:

  Enter the IP address, subnet 

mask, and gateway address which is provided by your ISP. 

3. 

Primary  DNS/ Secondary DNS: 

Input the  IP address of primary  and 

secondary DNS server that is provided by your ISP. Secondary DNS can be 

ignored if only one DNS server is provided by your ISP. 

4. 

MTU

: Most ISP offers MTU value to users. The default value is 0 (auto). 

5. 

NAT:

 By default, it is enabled. If you disable this option, there will be no NAT 

mechanism between LAN side and WAN side. 

6. 

Network Monitoring: 

You can do preferred settings by using this feature to 

monitor the connection status of WAN interface. Checking mechanism 

depends on several parameters defined here. The network monitoring 

provides the WAN interface status and then system can prevent embedded 

3G/LTE modem from some sort of auto-timeout and disconnects from the 

Internet after a period of inactivity. 

Enable:

 Check the box to do Network Monitoring. 

Summary of Contents for GEM420







































































































































































Reviews:

No comments