Page 2 of 5
09-13-569-Rev2
Position the Restraint Mount underneath the chosen inner tray slat.
Line up the M8 Channel Nut on the underside channel of the Restraint Mount with the smaller inboard hole.
1
Installation For Heavy Duty Cargo Trays
Important!
Fit to a centrally located inner slat, not to outer slats.
X
X
Install Restraint Clamp onto outside ridge of the chosen inner tray slat and secure to Restraint Mount with
M8 Washer, M8 Spring Washer and M8 Set Screw. Use a 13 mm spanner to tighten screws to 14 Nm.
Repeat all steps for other side.
2
M8 Washer
M8 Spring Washer
M8 Set Screw
Restraint Clamp
M8 Channel Nut
M8 Channel Nut
Place the Restraint Strap over the top of the 4 kg Gas Bottle and attach the hooked end to an outboard slot
in the Restraint Mount. Feed the unhooked end of the Restraint Strap through the Ratchet. Attach the
Ratchet Strap hook to the other outboard slot in the Restraint Mount.
Tighten Ratchet until gas bottle is
fi
rmly secured.
3
