Page 4 of 5
09-13-569-Rev2
3
Fasten an M10 Eye Bolt and two M10 Washers
onto each M10 Square Nut. Tighten Eye Bolts.
A tool such as a screwdriver through the eye of
the bolt may be used for leverage to tighten the
Eye Bolt
fi
rmly.
1
Load the 4 kg gas bottle onto the
basket and centered over a crossbar.
Installation for Baskets on Prorack Aero and International T-Slot Crossbars
2
Remove leg cover or end cap. Push rubber
in
fi
ll down and slide two M10 Square Nuts
into the crossbar channel on either side
of the gas bottle. It is recommended that
the distance between the two Square Nuts
measure roughly 400 mm. Replace leg cover
or end cap.
400 mm
4
Place the Restraint Strap over the top of the
4 kg Gas Bottle and attach the hooked end to
an Eye Bolt. Feed the unhooked end of the
Restraint Strap through the Ratchet. Attach
the Ratchet Strap hook to the other Eye Bolt.
Tighten Ratchet until gas bottle is
fi
rmly
secured.
The preferred orientation of Eye
Bolts is perpendicular to crossbar
