21
auto-start/auto-land
auto-start
auto-land
when repulsorlifts are activated, push button once when on the ground to auto-
start.
Push button for 2 seconds when in the air to auto-land.
Push button for 2 seconds while in the air to
auto-land.
when auto-land is pushed it will override the
sticks (gimbals) control, unless the left stick
(gimbal) is moved up or down during the auto-land
operation.
the right control stick will function normally
during the auto-land sequence, allowing you to
control the direction of your descent.
if the barometric pressure sensor is off (for a
manual take-off), then the left stick must be
moved all the way down before the blades will
unlock and allow you to control the throttle
manually.
auto-start only works when the barometric pressure sensor is activated.
if barometric pressure sensor is activated, auto-start will work only if the left
stick (gimbal) is in the center position.
the right control stick will function normally during the auto-start sequence,
allowing you to control the direction of your take-off.
after auto-start button is pressed, motors will activate and the ship will take off
and hover at a height of approximately 6 feet.
if the left stick (gimbal) is pushed up or down, the auto-start will be canceled
and normal controls will resume.
