13
screwdriver
speaker
neck strap attacHment
HeadpHone Jack
this handy screwdriver attaches to your
controller and can be used to remove screws from
the battery cover or to tighten the screw on the
phone holder. it can also be used to remove parts
on your drone if repairs are needed.
the controller
’
s speaker will play every sound,
including music, explosions, and more.
for use with a lanyard, to help support the
controller around your neck.
(lanyard not included)
the controller
’
s headphone jack functions in
the same way as the speaker, but will only
work when the headphones are plugged in. when
headphones are connected, the controller
’
s speaker
will switch off and all sound will be routed
through the headphones. when the headphones are
unplugged, sound will resume through the speaker.
if you experience a hard landing or crash, your
drone begins to drift in a particular direction,
you will need to land and recalibrate the gyro.
on a flat level surface with the drone
’
s motors
stopped, hold down the button for 2 seconds
to calibrate the gyro.
caliBrate
