20
on/off
aux weapons
1 seconds
4 seconds
on/off
white leds
1 beep
1 beep
_____________
_____________
speed cHange
turn on/off leds and aux
weapons
when the controller is powered on, it will always
start on speed mode 1. if the controller was
in speed mode 3 before turning it off, it will
return to speed mode 1 when it is turned back on.
Push the button to change speeds between modes
1-3. if you are in speed mode 3 and press the
button, you will cycle over to speed mode 1.
flying speed is indicated by the leds surrounding
the controller
’
s power button.
Push the button for 1 second (you will hear
1 beep) to turn on/off the white leds that
illuminate your ship. (the red leds in the rear
of your ship will remain on.)
Hold down the button for 4 seconds (you will
hear 2 beeps) to turn on/off your vehicle
’
s
aux weapons. note that when the aux weapons
are activated, the ir transceiver will be
deactivated, and vice versa.
red
- synced to ship
speed 1
speed 3
speed 2
t-mode
simultaneously push the left and right gimbals
(control sticks) down and in to activate the
emergency stop. this will cut all power to the
motors and the ship will fall to the ground. this
is only to be used in case of emergency, as the
ship may get damaged when it hits the ground.
emergency stop
