PRONAR T740, Manual

Page: 129 / 136

5.41
pneumatic, electric and hydraulic plugs, lights, electrical connections,
information and warning stickers, identification plates, hydraulic clutch, chain
gears etc. Great water jet pressure may damage these elements.
•
Do not direct water jet at individual trailer greasing points.
•
For cleaning and maintenance of plastic coated surface it is recommended to
use clean water or special preparations designed for this purpose.
•
Do not apply organic solvents, preparations of unknown origin or other
substances which may cause damage to lacquered, rubber or plastics surfaces.
In the event of doubt it is recommended to make a test on an unseen surface
area.
•
Surfaces smeared with oil or grease should be cleaned by application of
benzene extraction and then washed with clean water with added detergent.
DANGER
Familiarise yourself with instructions for application of washing detergents and
maintenance preparations.
While washing wear appropriate protective clothing and goggles protecting against
splashing.
Washing detergent should be kept in original containers, optionally in replacement
containers, but very clearly marked. Preparations that are harmful to health may not be
stored in food and drink containers.
Container interior may only be cleaned with clean running water.
•
Care for the cleanness of elastic conduits and seals. The plastic from which
these elements are made may be susceptible to organic substances and some
detergents. As a result of long-term reaction of some substances, the ageing
process may be accelerated and risk of damage increased. Rubber elements
should be maintained with the aid of special preparations after previous
thorough washing.
•
After finishing washing wait until trans-shipment trailer is dry and then grease all
inspection points according to recommendations. Remove excess oil or grease
with a dry cloth.