PRONAR T130, Operator'S Manual

Page: 1 / 90

INTRODUCTION
Information contained herein is current at date of publication. As a result of improvements,
some numerical values and illustrations contained in this publication may not correspond to
the factual specification of the machine supplied to the user. The manufacturer reserves the
right to introduce design changes in machines produced that facilitate operation and improve
the quality of their work, without making minor amendments to this Operator's Manual.
Please send your comments and proposals on the design and operation of the machine to
the Manufacturer. This information enables objective evaluation of the machines produced
and provides indications for their further improvement. Information on significant design
changes is passed on to users on information inserts attached to this Operator's Manual
(annexes).
This Operator's Manual is an integral part of the machine's documentation. Before using the
machine, the user must carefully read this Operator's Manual and observe all
recommendations. This guarantees safe operation and ensures malfunction free work of the
machine. The machine is designed to meet obligatory standards, documents and legal
regulations currently in force.
The manual describes the basic safety rules and operation of Pronar T130 single axle sand
spreader. If the information contained in the Operator's Manual needs clarification then the
user should refer for assistance to the sale point where the machine was purchased or to the
Manufacturer.
Manufacturer's address:
PRONAR Sp. z o.o.
ul. Mickiewicza 101A
17-210 Narew
Contact telephones
+48 085 681 63 29 +48 085 681 64 29
+48 085 681 63 81 +48 085 681 63 82