1.7
ATTENTION!
Demand that the seller carefully and precisely fills out the WARRANTY BOOK and
guarantee repair coupons. A missing date of purchase or sale point stamp, may make
the user ineligible for any warranty repair or refund.
1.5
TRANSPORT
The sand spreader is ready for sale completely assembled and does not require packing.
Packing is only required for the machine's technical documentation, connection lead for the
electrical system and possible additional equipment (warning reflective triangle, slow-moving
vehicle warning sign).
ATTENTION!
When transporting independently, the user must carefully read this operator's manual
and observe its recommendations. When being transported on a motor vehicle the sand
spreader must be mounted on the vehicle's platform in accordance with the transport
safety requirements. The driver of the vehicle should take particular care while driving.
This is due to the vehicle's centre of gravity shifting upwards when loaded with the
machine.
The sand spreader is delivered to the user either transported on a vehicle or, independently
(towed), after being attached to a tractor. In the case of independent (towed) delivery, the
"slow moving vehicle" plaque should be attached. The towing speed should be adapted to
the current road conditions, but must not be greater than the maximum design speed. The
machine may sway when being towed. Should this happen, the driving speed should be
decreased.
When loading and unloading the sand spreader, comply with the general principles of
workplace health and safety for reloading work. Persons operating reloading equipment must
have the qualifications required to operate these machines.
The sand spreader should be attached firmly to the platform of the vehicle using straps or
chains fitted with a tightening mechanism. The fastening equipment used must have a valid
safety certificate. Chocks or other objects without sharp edges should be placed under the
sand spreader wheels to prevent it from rolling. The chocks must be fixed to the platform of
Summary of Contents for T130
