![background image](http://html.mh-extra.com/html/promise-technology/vessjbod-1740/vessjbod-1740_quick-start-manual_1617258005.webp)
Task 2: Mounting VessJBOD in a Rack
5
Task 2: Mounting VessJBOD in a Rack
The VessJBOD subsystem installs to the rack using the available mounting rails.
You can also use your existing rails.
Figure 4. VessJBOD mounted in a rack with the available rails
To install the VessJBOD subsystem into a rack with the available mounting rails:
1.
Check the fit of the mounting rails in your rack system.
2.
Adjust the length of the mounting rails as needed.
Cautions
•
At least two persons are required to safely lift, place, and
attach the VessJBOD subsystem into a rack system.
•
Do not lift or move the VessJBOD subsystem by the handles,
power supply or the I/O module. Hold the subsystem itself.
•
Only a qualified electrician who is familiar with the installation
procedure should mount and install the VessJBOD
subsystem.
•
Be sure all switches are OFF before installing the VessJBOD
subsystem or exchanging components.
Vertical Rack Post
VessJBOD subsystem
Mounting rails mount
outside the rack post
Handles mount
outside the rack post