Promise Technology VessJBOD 1000 Series Product Manual Download Page 41 | Manualshive

Page: 41 / 62

background image

37

Chapter 4: Maintenance

This chapter covers the following topics:

•

Updating the Firmware (below)

•

Replacing a Power Supply (page 41)

•

Replacing an I/O Module (page 42)

•

Replacing a Cooling Fan (page 43)

Updating the Firmware

There are two ways to update the VessJBOD’s firmware.

•

Through a VessRAID subsystem using WebPAM PROe

•

With the JBOD Flash Utility

Downloading the Firmware Image File

Go to the Promise web site at

http://www.promise.com/support/support_eng.asp

and download the latest firmware image (.img) file to your TFTP server or your
Host PC. The firmware image file includes all of the files to update the
VessJBOD.

Updating Firmware in WebPAM PROe

You can use this procedure if your VessJBOD expansion unit is managed by a
VessRAID subsystem. This procedure updates the firmware on the VessRAID
and any attached VessJBOD expansion units through WebPAM PROe.

For more information on WebPAM PROe, see “Chapter 4: Management with
WebPAM PROe” and “Chapter 8: Maintenance” in the

VessRAID Product

Manual

.

To update the firmware:

1.

Click the Subsystem

icon.

2.

Click the Software Management

icon.

3.

Click the

Firmware Update

tab.

4.

Do one of the following actions:

Warning

Do not restart the VessJBOD during a firmware upgrade
procedure. Wait until you see the

Flash image completed

message.

«
...
39
40
41
42
43
...
»

Summary of Contents for VessJBOD 1000 Series































































Reviews:

No comments

Related manuals for VessJBOD 1000 Series

Brand: Quantum Pages: 68

DLTtape SDLT 600

Brand: Quantum Pages: 142

Brand: Quantum Pages: 16

Brand: Quantum Pages: 8

StorNext QD7000

Brand: Quantum Pages: 17

Brand: Tandberg Data Pages: 81

StorNext QD7000

Brand: Quantum Pages: 39

Brand: Quantum Pages: 98

Brand: Quantum Pages: 12

Brand: Quantum Pages: 2

Brand: Qualstar Pages: 366

Brand: Qualstar Pages: 42

Brand: Qualstar Pages: 177

Brand: Quantum Pages: 4

Brand: WiebeTech Pages: 4

ST31000333AS - Barracuda 7200.11 1 TB SATA 32 MB Cache Bulk/OEM Hard Drive

Brand: Seagate Pages: 2

SG-XPCIESAS-R-INT-Z

Brand: Oracle Pages: 148

Brand: AIC Pages: 79

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands