![background image](http://html.mh-extra.com/html/promise-technology/vessjbod-1000-series/vessjbod-1000-series_product-manual_1617256022.webp)
VessJBOD 1000 Series Product Manual
18
Connecting the Power
Plug-in the power cord on the power supply on the back of the VessJBOD
enclosure and switch on the power supply. If you have a VessJBOD 1830, 1830+,
1840, or 1840, plug-in and turn on both power supplies.
When the power is switched on, the LEDs light up.
Front Panel LEDs
When boot-up is finished and the VessJBOD subsystem is functioning normally:
•
Power and Global Enclosure Status LEDs display green continuously.
•
I/O Module Activity LED flashes green when there is controller activity.
•
System Heartbeat LED blinks green once per second.
Figure 9. VessJBOD front panel LED display
I/O Module LEDs
When boot-up is finished and the VessJBOD subsystem is functioning normally:
•
Fan LEDs display green continuously.
•
SAS port LEDs flash green when there is activity.
Caution
After you turn the power supply switches off, you must wait at least
10 seconds before you turn the power switches on again.
Power
I/O Module Activity
Global Enclosure Status
Reserved
Reserved
System Heartbeat