![background image](http://html.mh-extra.com/html/promise-technology/ultratrak-rm4000/ultratrak-rm4000_quick-start-manual_1617251002.webp)
UltraTrak RM4000
2
Copyright
© 2002, Promise Technology, Inc.
Copyright by Promise Technology, Inc. (Promise Technology). No part of this
manual may be reproduced or transmitted in any form without the expressed,
written permission of Promise Technology.
Trademarks
Promise, and the Promise logo are registered in U.S. Patent and Trademark
Office. All other product names mentioned herein may be trademarks or
registered trademarks of their respective companies.
Important data protection information
You should back up all data before installing any drive controller or storage
peripheral. Promise Technology is not responsible for any loss of data resulting
from the use, disuse or misuse of this or any other Promise Technology product.
Notice
Although Promise Technology has attempted to ensure the accuracy of the
content of this manual, it is possible that this document may contain technical
inaccuracies, typographical, or other errors. Promise Technology assumes no
liability for any error in this publication, and for damages, whether direct, indirect,
incidental, consequential or otherwise, that may result from such error, including,
but not limited to loss of data or profits.
Promise Technology provides this publication “as is” without warranty of any kind,
either express or implied, including, but not limited to implied warranties of
merchantability or fitness for a particular purpose.
The published information in the manual is subject to change without notice.
Promise Technology reserves the right to make changes in the product design,
layout, and driver revisions without notification to its users.
Contents
Step 1: Unpack your UltraTrak ................................................................... 3
Step 2: Placement of your UltraTrak .......................................................... 3
Step 3: Install Hard Drives.......................................................................... 5
Step 4: Connect the SCSI Cable................................................................ 7
Step 5: SCSI Termination........................................................................... 8
Step 6: Connect the Power ........................................................................ 9
Step 7: Enter the Password...................................................................... 10
Step 8: Assign a SCSI ID ......................................................................... 10
Step 9: Configure the UltraTrak................................................................ 11
Step 10: Format the Array ........................................................................ 11
Frequently Asked Questions .................................................................... 12