Étape 10 : configuration d'une imprimante USB
53
Étape 10 : configuration d'une imprimante USB
Vous pouvez utiliser le SmartStor comme serveur d'impression. Vous devez
connecter l'imprimante USB, activer le serveur d'impression du SmartStor et
configurer l'impression sur votre PC.
•
Connexion d'une imprimante USB au SmartStor (page 53)
•
Configuration du serveur d'impression sur le SmartStor (page 53)
•
Configuration de l'impression Windows (page 53)
•
Configuration de l'impression Linux (page 54)
•
Configuration de l'impression Macintosh (page 55)
Connexion d'une imprimante USB au SmartStor
Pour connecter une imprimante USB :
1.
Configurez votre imprimante selon le
Guide de configuration ou le Manuel
d'utilisation de celle-ci.
2.
Installez les pilotes de l'imprimante sur vos PC comme décrit dans le
Guide
de configuration ou le Manuel d'utilisation de celle-ci.
3.
Fixez le câble USB de votre imprimante à l'une des connexions USB situées
à l'arrière du SmartStor. Reportez-vous à la Figure 2.
Configuration du serveur d'impression sur le SmartStor
Vous devez utiliser PASM pour configurer le SmartStor pour l'impression.
Pour configurer le serveur d'impression du SmartStor :
1.
Démarrez PASM.
Reportez-vous à la section « PASM dans votre navigateur » à la page 47 ou
« PASM dans SmartSYNC » à la page 48.
2.
Dans l'arborescence sur la gauche de l'écran PASM, cliquez sur le signe
+
adjacent à l'icône Fichier & Impression
pour développer l'arborescence.
3.
Cliquez sur l'icône Commande de protocole
, puis sur l'onglet Serveur
d'impression.
4.
Cliquez sur le bouton de l'option
Activer
adjacent au serveur d'impression.
5.
Cliquez sur le bouton
OK
pour enregistrer les paramètres.
Configuration de l'impression Windows
Pour configurer l'impression sur un PC Windows :
1.
Sur le bureau Windows, double-cliquez sur l'icône Favoris réseau.
2.
Cliquez sur le bouton
Recherche
dans la barre d'outil.
Si le bouton Recherche ne s'affiche pas, allez dans Affichage > Barres
d'outils et sélectionnez
Boutons standard.