Promise Technology PegasusPro R16 Product Manual Download Page 17

Page: 17 / 80

Promise

Technology

PegasusPro R16

Drive carrier LED behavior on PegasusPro R16

LED

Description

Drive Status

Each drive carrier has two LEDs on the right side of the front, the Drive Status LED located above

the Activity LED. The Drive Status LED displays GREEN when a drive is configured and working

properly. When the lights are RED the HDD requires manual replacement. ORANGE indicates

background RAID activity on this particular HDD, no user action is required.

Drive Activity

Steady BLUE when HDD link is established, flashes BLUE during drive activity.

PegasusPro R16 Front Panel - Left side

USB ports

Power button

Drive Status

one LED per carrier

Activity

one LED per carrier

Summary of Contents for PegasusPro R16
















































































Search results

Summary of Contents for PegasusPro R16

Reviews:

Related manuals for PegasusPro R16

Brands by name

Popular brands

Promise Technology PegasusPro R16, Product Manual

Search results

Summary of Contents for PegasusPro R16

Reviews:

Related manuals for PegasusPro R16

Brands by name

Popular brands