![background image](http://html.mh-extra.com/html/promise-technology/pegasus-2-m4/pegasus-2-m4_installation-manual_1617239010.webp)
Pegasus2 boot up LED behavior
Power
Button / LED
Drive Power /
Status LED
7
Promise Technologies
s
tep
3: p
oWer
o
n
p
egAsus
2
Follow these steps to connect the power cord and power on the Pegasus2.
1. Attach the power cord on the back of the Pegasus2 unit. (See page 4 to see an
illustration of the back of device)
2. Plug the other end into a power source.
3. Press the Power Button. (See illustration of front of device below).
You will observes the that the
Power Button
LED turns orange.
It takes about 30 seconds to boot the Pegasus2 unit. When fully booted:
• The Power Button LED turns blue.
• The drive carrier Power / Status LEDs turn blue.
Summary of Contents for Pegasus 2 M4
Page 1: ...R4 R6 R8 M4 ...