FastTrak S150 TX4
12
Creating a Security Array with Quick Initialization
Under the Security setting, FastTrak S150 TX4 permits two drives to be used for
a single Mirrored array or four drives to be used for a Mirrored/Striped array in
Auto Setup.
You would use this method if you wish to create a mirrored array and erase the
early block from your existing drives.
Warning
Using the Quick Initialization option on existing drives will result
in the loss of all data on those drives.
Note
When creating a Security array with new drives, a feature called
Gigabyte Boundary will automatically be set to ON. For a
description of this feature, see page 23 of the
User Manual
on
the software CD.
To create an array for data protection using new hard drives, follow these steps:
1.
Press the Spacebar to choose
Security
under the Optimize Array for
section.
2.
Press Ctrl-Y to Save your selection.
3.
The window below will appear.
Do you want the disk image to be
duplicated to another or do quick
initialize or create only?
Y - Create and Duplicate
N - Create Only
I - Create and Quick Initialize
4.
Press I for the Create and Quick Initialize
5.
A window will appear almost immediately confirming that your Security array
has been created. Press any key to reboot the system.
Array has been created.
<Press Any Key to Reboot>
