2
Rail ends attach on the
outside of the front and
rear rack posts
Rail ends attach to the outside of each post
Rails installed
and tightened
Brackets
3U/4U enclosure
Placing the system onto the rack rails
Screws and flange nuts attach
the enclosure to the rack posts
Secure to rack
Brackets mount outside the rack post
Mounting rails
mount outside the
rack post
Vertical rack post
System installed in rack
3. Place the enclosure hardware onto the rails.
•
At least two persons are required to safely lift the system.
•
Lift the enclosure hardware itself. Do not lift the system by its brackets.
4. Secure the enclosure hardware to the rack.
• The unit attaches to the rack posts using the included screws and flange nuts. One screw each
side, in the upper hole only.
• Use the attaching screws and flange nuts that came with the enclosure hardware.
