background image

PAIR OF JACK STANDS

*Actual product may vary slightly

Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this product.

Observe all safety information to protect yourself and others. Failure to observe the instructions may result in property

damage and/or personal injury. Please keep instructions for future reference.

For warranty purchases, please keep your dated proof of purchase. File or attach to the manual for safe keeping.

For Customer Service, Call 

1-800-348-5004

or e-mail 

[email protected]

38013 / 38014 

      05/2017

Summary of Contents for MaxLoad 38013

Page 1: ... information to protect yourself and others Failure to observe the instructions may result in property damage and or personal injury Please keep instructions for future reference For warranty purchases please keep your dated proof of purchase File or attach to the manual for safe keeping For Customer Service Call 1 800 348 5004 or e mail customerservice focus ontools com 38013 38014 05 2017 ...

Page 2: ...age WARNING Do not overload jack stands beyond rated capacity Overloading can cause damage to or failure of the jack stands POSITION LOAD ON CENTER OF SADDLE ONLY ALWAYS USING STANDS IN PAIRS ON HARD LEVEL SURFACE CAPABLE OF SUST AINING THE LOAD USING OF STANDS ON OTHER THAN HARD LEVEL SURFACES CAN RESULT IN STANDS INSTABILITY AND POSSIBLE LOSS OF LOAD MODEL CAPACITY TON MIN HEIGHT MAX HEIGHT BASE...

Page 3: ... control lever up while lifting saddle shaft to desired height Push control lever down to lock pawl into teeth located in center column MAKE SURE PAWL FULLY ENGAGED INTO TEETH 4 Carefully lower load onto stands 1 Visual inspection shall be made before use of the stands checking cracks cracked weld and missing and or damaged parts And stand that appears to be damaged in any way shall be removed fro...

Page 4: ...alterations or a lack of maintenance FOT shall in no event be liable for death injuries to persons or property or for incidental special or consequential damages arising from the use of our products To receive service under warranty the original manufacturer part must be returned for examination by an authorized service center Shipping and handling charges may apply If a defect is found FOT will e...

Reviews: